Calibrador Portátil Yokogawa CA71
Yokogawa CA71 Handy Calibrator
Pedir orçamento
Calibrador multifunção portátil Yokogawa CA71 fornece e mede simultaneamente tensão, corrente, resistência, TC, RTD, frequência e sinais de pulso com armazenamento em memória.
Detalhes do produto
| Modelo | CA71 |
| Fabricante | Yokogawa |
| Categoria | Instrumentos de Calibração |
| Disponibilidade | Por encomenda |
Descrição
Visão Geral
Yokogawa CA71 é um calibrador multifunção portátil projetado para uso em campo e laboratório. Este calibrador portátil leve pode simultaneamente fornecer e medir voltagem, corrente, resistência, termopar (TC), RTD, frequência e sinais de pulso. A interface de rotação intuitiva facilita a operação—apenas abra o estojo de transporte, conecte os cabos e comece a fazer medições. Armazena até 50 conjuntos de valores na memória interna para fácil documentação e recall de campo.
Características Principais
- Fornecimento e medição simultânea de múltiplos tipos de sinal: voltagem, corrente, resistência, TC, RTD, frequência e pulso
- Função de saída auto-step com intervalos de step selecionáveis (2,5 ou 5 segundos)
- Função de varredura com tempo de varredura ajustável (16 ou 32 segundos)
- Função de memória: armazena até 50 conjuntos de valores com medições associadas
- Display LCD segmentado (aproximadamente 76 × 48 mm) com iluminação LED
- Operação de rotação simples
- Interface serial RS-232 para comunicação online opcional (cabo vendido separadamente)
- Design compacto: aproximadamente 190 × 120 × 55 mm, 730 g incluindo baterias
Aplicações
- Calibração de campo de transmissores de processo e sensores
- Verificação de loops 4-20 mA e fontes de alimentação 24 VDC
- Medição de temperatura e verificação de termopar
- Calibração de sinal de frequência e pulso
- Manutenção e troubleshooting de instrumentação industrial
Acessórios Inclusos
- Cabos de chumbo para fornecimento (um vermelho, dois pretos)
- Cabos de chumbo para medição (um vermelho, um preto)
- Estojo de transporte
- Adaptador de terminal
- Quatro baterias alcalinas tamanho AA
- Fusíveis de reposição
- Manual do usuário
Especificações
| Auto-Step Output Function | n value sent automatically when n/m function selection is selected (two options: approximately 2.5 seconds/step or approximately 5 seconds/step) |
| Sweep Functions | Sweep time (two options: approximately 16 seconds or approximately 32 seconds) |
| Memory Function | 50 value sets (generated and measured values are stored as value sets with the same address (up to 50 value sets can be stored)) |
| Measuring Unit Maximum Input | Voltage terminal: 300 V AC Current terminal: 120 mA DC |
| Current Terminal Input Protection | Fuses: 125 mA/250 V |
| Measuring Unit Ground Voltage | Maximum 300 V AC |
| Measurement Display Updating Rate | Approximately once per second |
| Serial Interface | Enabled when communication cable (RS232) is connected; sold separately as optional accessory |
| Display | Segmented LCD (Approx. 76 mm × 48 mm) |
| Backlight | LED backlight; auto-off after one minute (from when LIGHT key is turned on) |
| Power Supply | Four AA alkaline batteries, or special AC adapter (sold separately) |
| Battery Life | Measurement off, output 5 V DC/10 kO or greater: Approximately 40 hours Simultaneous signal generation/measurement, output 5 V DC/10 kO or greater: Approximately 20 hoursSimultaneous signal generation/measurement, output 20 mA/5 V: Approximately 12 hours (using alkaline batteries, with backlight off) |
| Auto-Power-Off Function | Approx. 10 minutes (auto-power-off can be disabled through a DIP switch setting) |
| Applicable Standard | EN55011: 1998, Class B, Group 1 EN61326-1: 1997 + A1: 1998 IEC61010-1, IEC61010-2-31 |
| Insulation Resistance | Across input terminal and output terminal, 500 V DC, 50 MO or greater |
| Withstand Voltage | Across input terminal and output terminal, 3.7 kVAC, for one minute |
| Operating Temperature And Humidity Ranges | 0 - 50°C, 20 - 80% RH (no condensation) |
| Storage Temperature And Humidity Ranges | -20 - 50°C, 90% RH or less (no condensation) |
| External Dimensions | Approx. 190 × 120 × 55 mm |
| Weight | Approx. 730 g (including batteries) |
| Easy Operation | The Handy Calibrator incorporates rotary switches for simple handling. Just open the carrying case cover and connect the cables, and you're ready to take measurements. |
| A Wide Array of Useful Functions | Source Values set in steps of 4-20 mA 24V DC Power Supply to Transmitter Divided output (n/m) function Output settings are divided, eliminating the need for bothersome calculations for percentage output. Autostep function Changes the output value in step form based on the setting from the divided output (n/m) function. Changes can be sourced automatically every 10% or 25%. Online communication (CA71 only) RS-232C-compliant optically isolated interface Sweep function Linearly increases or decrease the output. The increasing/decreasing time can be set to either 16 or 32 seconds. Memory function Source values and measurements forming individual value sets can be saved to or read from the Handy Calibrator's internal memory (maximum 50 value sets). Temperature monitor function |
| CA71 | CA71 HANDY CAL calibratorProvided with temperature measurement and communication functions |
Pedir orçamento
Calibrador Portátil Yokogawa CA71
Resposta em 24 horas
Sem compromisso
Comunicação direta