Cabo de Teste de Lançamento EXFO FTB-LTC-B-1000-XX-YY
EXFO FTB-LTC-B-1000-XX-YY Launch Test Cable
Pedir orçamento
O cabo de teste de lançamento EXFO FTB-LTC-B-1000-XX-YY com 1000 m de fibra monomodo cobre a zona morta do OTDR para medição de perda precisa das conexões de fibra primeira e última.
Detalhes do produto
| Modelo | FTB-LTC-B-1000-XX-YY |
| Fabricante | EXFO |
| Categoria | Teste de Rede e Fibra Óptica |
| Disponibilidade | Por encomenda |
Descrição
Visão Geral
O EXFO FTB-LTC-B-1000-XX-YY é um cabo de teste de lançamento de 1000 metros projetado para funcionar em conjunto com um OTDR. Cobre a zona morta do OTDR, permitindo medições de perda precisas nas primeira e última conexões de um link de fibra em teste. Este modelo monomodo com fibra de 9/125 µm é essencial para comissionamento e solução de problemas abrangentes de fibra.
Recursos Principais
- Fibra monomodo de 1000 m de comprimento (9/125 µm, G.652D)
- Perda de inserção do conector menor que 0,5 dB
- Refletância: UPC menor que –50 dB, APC menor que –60 dB
- Atenuação típica: 0,37 dB/km em 1310 nm, 0,25 dB/km em 1550 nm
- Disponível com múltiplos tipos de conector: FC/APC, SC/APC, FC/UPC, ST/UPC, SC/UPC, E2000/UPC, E2000/APC, LC/UPC, LC/APC
- Cordão de remendo externo: 2 × 1,5 m
Aplicações
- Instalação OTDR e solução de problemas de redes de acesso de fibra
- Medição de perda do primeiro e último evento de conector em links de fibra
- Comissionamento de infraestrutura de fibra nova
- Manutenção de rede e verificação de desempenho
Especificações
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Weight | 325 g 0.72 lb 2.72 kg 6 lb 1.36 kg 3 lb |
| External Patchcord Length | 2 x 1.5 m 2 x 5 ft 2 x 2 m 2 x 6.6 ft 2 x 2 m 2 x 6.6 ft |
| FTB-LTC-B-1000 | Launch test cable, single module for FTB platform, singlemode fiber 9/125, 1000 m |
Pedir orçamento
Cabo de Teste de Lançamento EXFO FTB-LTC-B-1000-XX-YY
Resposta em 24 horas
Sem compromisso
Comunicação direta