Cabo de Teste de Lançamento EXFO SPSB-B-150-98-88
EXFO SPSB-B-150-98-88 Launch Test Cable
Pedir orçamento
Cabo de teste de lançamento singlemode EXFO SPSB-B-150-98-88 com 150m para testes de fibra OTDR, permitindo medição de perda nas conexões primeira e última de fibra.
Detalhes do produto
| Modelo | SPSB-B-150-98-88 |
| Fabricante | EXFO |
| Categoria | Teste de Rede e Fibra Óptica |
| Disponibilidade | Por encomenda |
Descrição
Visão Geral
O EXFO SPSB-B-150-98-88 é uma caixa supressora de pulso portátil macio de 150 metros para testes com OTDR (Reflectômetro Óptico no Domínio do Tempo). Permite medição precisa de perda em pontos de conexão de fibra, preenchendo a zona morta do OTDR, essencial para caracterização precisa de links de fibra e verificação de instalação.
Principais Características
- Fibra singlemode de 150 m (9/125 µm) estende intervalo de medição de OTDR além da zona morta
- Conectores SC/APC para compatibilidade com a maioria das portas OTDR e painel de patch
- Perda de inserção de conector < 0.5 dB para degradação mínima de sinal
- Refletância de conector APC < –60 dB para medições de backscatter precisas
- Bolsa de transporte macio portátil para implantação em campo
- Reduz desgaste de conector OTDR eliminando acoplamento direto
Aplicações
- Caracterização e medição de perda de link de fibra óptica
- Teste de aceitação de instalação para redes de fibra
- Troubleshooting e manutenção de cabo
- Medição de perda de conexão primeira e última em spans de fibra
Especificações
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Feature | Description |
| SPSB-B-150 | Soft pulse suppressor bag, singlemode fiber 9/125, 150 m |
| 88 | SC/APC narrow key |
| 98 | LC/PC |
Pedir orçamento
Cabo de Teste de Lançamento EXFO SPSB-B-150-98-88
Resposta em 24 horas
Sem compromisso
Comunicação direta