Fonte de Alimentação DC Autorange Farnell AP100-30
Farnell AP100-30 Autoranging DC Power Supply
Pedir orçamento
A fonte de alimentação DC autorange Farnell AP100-30 é uma fonte de 1 kW com saída 0–100 V / 0–30 A, modos de tensão/corrente constante e controle remoto GPIB.
Detalhes do produto
| Modelo | AP100-30 |
| Fabricante | Farnell |
| Categoria | Fontes de Alimentação e Cargas Eletrônicas |
| Disponibilidade | Por encomenda |
Descrição
Visão Geral
A fonte de alimentação DC autorange Farnell AP100-30 é uma fonte de 1 kW com conceito autorange único que oferece uma ampla e ajustável gama de combinações de tensão e corrente dentro do seu envelope de potência constante. Este design flexível a torna ideal para aplicações de bancada e sistemas, muitas vezes atendendo aos requisitos presentes e futuros com um único instrumento.
Características Principais
- Envelope de potência de 1 kW com faixa de saída 0–100 V / 0–30 A
- Combinações de tensão e corrente autorange
- Modos de operação de tensão constante ou corrente constante
- Passo de tensão: 25 mV, precisão de programação: 0,2% + 0,13% f.s.
- Passo de corrente: 10 mA, precisão de programação: 1,1% + 0,13% f.s.
- Controle manual ou interface remota IEEE 488.2 (GPIB)
- Painéis digitais LED e indicadores de status
- Capacidade de sensoriamento remoto (compensação de queda de até 0,5 V por lead)
- Operação mestre/escravo para maior potência ou tensão
- Enclosure montável em rack
Aplicações
- Fonte de alimentação de bancada para desenvolvimento e prototipagem
- Integração de sistemas para equipamento de teste automatizado
- Teste de componentes e subsistemas que requerem alimentação estável
- Teste de carga e validação de produto
Especificações
| Compact and Efficient | Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems |
| Powerful Outputs | The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts. |
| Protected | CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values. |
| Remote Sensing | When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance. |
| Multiple Unit Operation | Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current. |
| AP100-30 | 25mV10mAVoltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s. Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s |
| AP100-30 | 0-100V/0-30A |
Pedir orçamento
Fonte de Alimentação DC Autorange Farnell AP100-30
Resposta em 24 horas
Sem compromisso
Comunicação direta