Fonte de Alimentação Autorangeminada Farnell AP60-150
Farnell AP60-150 Autoranging Power Supply
Pedir orçamento
O Farnell AP60-150 é uma fonte de alimentação CC autorangeminada de 3kW entregando 0-60V/0-150A com modos de tensão constante ou corrente, interface GPIB e sensoriamento remoto.
Detalhes do produto
| Modelo | AP60-150 |
| Fabricante | Farnell |
| Categoria | Fontes de Alimentação e Cargas Eletrônicas |
| Disponibilidade | Por encomenda |
Descrição
Visão Geral
O Farnell AP60-150 é uma fonte de alimentação CC autorangeminada de 3kW capaz de entregar 0-60V em 0-150A dentro de um envelope de potência constante. Utilizando topologia de switchmode eficiente, oferece combinações flexíveis de tensão e corrente adequadas para uso em bancada e integração de sistemas. A unidade apresenta modos de operação de tensão constante (CV) ou corrente constante (CI) com capacidades de programação e releitura de alta precisão.
Principais Características
- Saída de Potência de 3kW: Faixa de 0-60V/0-150A com combinações de tensão/corrente autorangeminadas
- Operação de Tensão Constante ou Corrente Constante: Limitação automática a valores predefinidos
- Interface GPIB IEEE 488.2: Controle manual ou por barramento com programação de alta resolução
- Sensoriamento Remoto: Mantém regulação na carga em distâncias até 0,5V de queda por cabo
- Operação Mestre/Escravo: Até quatro unidades podem ser conectadas para potência ou tensão aumentadas
- Medidores de Painel LED Digital: Exibição em tempo real de tensão e corrente com indicadores
- Design Montável em Rack: Topologia de switchmode compacta para integração de sistemas
- Passo de Tensão: 20mV, Passo de Corrente: 50mA
Aplicações
- Testes em bancada e desenvolvimento de equipamento
- Integração de sistemas e automação
- Fonte de alimentação de laboratório para P&D
- Testes de produtos e validação
Especificações
| Compact and Efficient | Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems |
| Powerful Outputs | The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts. |
| Protected | CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values. |
| Remote Sensing | When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance. |
| Multiple Unit Operation | Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current. |
| AP60-150 | 20mV50mAVoltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s. Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s |
| AP60-150 | 0-60V/0-150A |
Pedir orçamento
Fonte de Alimentação Autorangeminada Farnell AP60-150
Resposta em 24 horas
Sem compromisso
Comunicação direta